pad make good contact with the skin.
7. Press the button on the Wireless Tens device.
The blue light will begin blinking.
8. On the remote control, press the button. The
small “A” LED mode light will turn on. There are 6
modes in the unit. (See an explanation of each
mode on the next page.) Press MODE to change
the modes.
9. Press the INCREASE INTENSITY (+) button to
increase the stimulation to a comfortable level.
To decrease the stimulation intensity anytime
during treatment, press the DECREASE INTENSITY
(-) button. When the user switches the mode,
the intensity will automatically go down to the
minimum for safety reasons.
10. Treatment will automatically stop after 20
minutes. Treatment can be paused at any
time by pressing or stopped by pressing
the power button on the remote control or
Wireless Tens Device. DO NOT remove the device
until treatment has stopped.
Note:
Once the cycle is completed the Wireless Tens
Device and remote will turn off. If you required an
additional cycle first turn on the Wireless Tens Device
and then the remote.
Содержание RHB1038
Страница 1: ...User Manual RHB1038...
