Display Screen
•
The compressor pump always shows the air pressure
(mmHg) of the mattress on the display screen.
It can also
display the patient’s weight in Pounds when adjusting the
“Hard or Soft” settings.
Power
• When pushing the power button for first time, the mattress
will begin inflating. This process takes approx. 50 minutes.
When fully inflated, the mattress will begin alternating
automatically.
Hard Mode
• Increases the weight capacity in Pounds.
Tapping the
button each time will increase the weight by increments of
5 Lbs. To increase faster, hold down the button.
Soft Mode
• Decreases the weight capacity in Pounds.
Tapping the
button each time will decrease the weight by increments
of 5 Lbs. To decrease faster, hold down the button.
Static Mode
• Makes the mattress stop alternating and all cells will have
equal pressure. User can adjust the firmness by pressing
the Firm or Soft Key. The display will show the corresponding
mmHg / Lbs.
Seat Inflation Mode
• This allows the patient to set the bed in a seated position.
A “S”
will show on the display screen.
Lock/Unlock Mode
•
Hold the “Lock/Unlock Mode” for 3 seconds to unlock
panel and adjust settings.
After 2 minutes of not using the
buttons, the panel will lock automatically.
OPERATING FUNCTIONS
Display Screen (mmHg or Lbs)
Power
Hard Mode (Lbs)
Static Mode
Seating Mode (60mmHg)
Lock / Unlock Mode
Soft Mode (Lbs)
Firm
Soft
Power
Seat Inflation Mode
Lock / Unlock
Static Mode
mmHg / Lbs
Automatic Pressure Monitor
mmHg / Lbs
