Vivax WH-176TC, Руководство пользователя

Страница: 59 / 72

VIVAX
ENG
- 8 -
(2). Press “ ” for once, we can see the indicator light of 60°C shines, with the
green
LED light. It means that it will stop heating when the water temperature is 60°C.
Press “ ” for twice, we can see the indicator light of 70°C shines, with the
blue
LED light. It means that it will stop heating when the water temperature is 70°C.
Press “ ” for 3 times, we can see the indicator light of 80°C shines, with the
yellow
LED light. It means that it will stop heating when the water temperature is
80°C.
Press “ ” for 4 times, we can see the indicator light of 90°C shines, with the
purple
LED light. It means that it will stop heating when the water temperature is
90°C.
(4) After the use finished, please put plug off the power socket.
4 MAINTENANCE, REPAIR AND USE
• Never try to open and repair your appliance when it does not work.
• Please do not operate the appliance in case of a break or crack when it falls or
hits to a hard object. Contact the authorized service.
• Do not change the damaged cable or plug, contact the authorized service.
• Do not carry the appliance by holding its cable.
• Unplug the appliance by pulling out from the socket, not the power cord.
• Unplug the appliance when not in use.
5. CLEANING AND MAINTENANCE
• Before cleaning the appliance, turn the
On
/
Off
button to ''
O
'' (
Off
) position, unplug it
and wait until your appliance cools down.
• Clean the inside of the coffee maker with soft sponge and detergent, then rinse it with
water. Do not use abrasive or similar objects to clean the heater of the coffee maker.
• Use a dry or damp towel to clean the outside of the coffee maker. Do not use chemical
or abrasive cleaners to clean the outer surface of the appliance.
• Do not immerse the appliance into water.
Descaling:
Regular descaling will ensure efficiency as well as prolong the life of your product. It
should be done at least every four weeks or earlier if the products is used heavily or in
hard water areas.
Descaling with ordinary vinegar
Fill the kettle up to “max” with a mixture of one part ordinary vinegar and two parts
water
.
Switch on and wait for the appliance to switch off automatically
.
1. Let the mixture remain inside the kettle overnight
.
2. Discard the mixture the next morning
.
3. Fill the kettle with clean water up to “max” mark and boil again
.
4. Discard the boiled water to remove any remaining scale and vinegar
.
5. Rinse the inside of the kettle with clean water
.
Descaling with citric acid for domestic use :
1. Fill the kettle up to “max” with water
.
Put 1 tablespoon of citric acid inside and boil
the water
2. Discard the mixture
3. Fill the kettle with clean water up to “max” mark and boil again
．
4. Discard the boiled water to remove any remaining scale and citric acid
．
5. Rinse the inside of the kettle with clean water
．
Warning!
Cleaning and maintenance operations should not be done by children without
supervision.