Vivax TTR-93, Руководство пользователя

Страница: 33 / 56

VIVAX
ENG
.
12
Thermostat
The temperature selector knob is located on the right hand side wall of the
refrigerator interior:
Setting“Off”
㸸
UnitOff
Setting“Min”
㸸
Less Cool Temperature
Setting“Med”
㸸
Normal Operation(adequate for most situations)
Setting“Max”
㸸
Coolest Temperature
During high ambient temperatures e.g. on hot summer days. It may be
necessary to set the thermostat to the Coolest setting (position
“ Max ”).
This
may cause the compressor running continuously in order to maintain a low
temperature in the cabinet.
For the first time you install your refrigerator, set the thermostat knob at
“ Med ”. Give your refrigerator time to cool down completely before adding
food. It is the best to wait 24 hours before adding food. The thermostat knob
controls the temperature.
When the thermostat control knob is set to
OFF
, the refrigerator will not be
running.
The first Start
The refrigerator shall stay for half an hour before
connecting 220-240 V/50Hz power when it is firstly
started.
The refrigerator shall run 2 to 3 hours before loading
fresh or frozen foods; the refrigerator shall run for
more than 4 hours in summer in advance considering
that the ambient temperature is high.
Maintenance of Refrigerator
Cleaning
Dusts behind the refrigerator and on the ground shall
be timely cleaned to improve the cooling effect and
energy saving.
The interior of the refrigerator should be cleaned
regularly to avoid odor. Soft towels or sponge dipped
in water and non-corrosive neutral detergents are
suggested for cleaning. The freezer of shall be finally
cleaned with clean water and dry cloth. Open the
door for natural drying before the power is turned on.