Vivax MFR-32, Руководство пользователя

Страница: 58 / 76

ENG
VIVAX
.
17
Reversing the Door
Caution :
To avoid injury to yourself and/or property we recommend someone
assist you during the door reversal process.
Ensure the appliance is unplugged and empty .
We recommend you have someone to assist you .
Tools required: Cross-bladed screw driver
NOTE: To take the door off it is necessary to tilt the appliance backward.
You should rest the appliance on something solid, e.g. a chair just below the top
panel so you can access the bottom of the refrigerator.
DO NOT lay the appliance completely flat as this may damage the coolant system.
1. Remove upper hinge
2. Remove the door and put them on secure and soft surface.
3. Remove bottom adjustable legs and remove bottom hinge.
4. Translate bottom hinge on another cabinet side
5. Pute door on bottom hinge, close the door and fix upper hinge.
6. Adjust legs
NOTE
： ： ： ：
To take the door off it is necessary to tilt the Appliance backward.
You should rest the Appliance on something solid e.g.a chair just below the top
panel. Do not lay the Appliance completely flat as this may damage the coolant
system.
Tips for Energy savings
Try not to open the door too often, especially when the weather is wet and hot.
Once you open the door, close it as soon as possible.
Every now and then check if the appliance is sufficiently ventilated (adequate air
circulation behind the appliance).
In normal temperature conditions, please arrange the thermostat at the middle
setting.
Before loading the appliance with packages of fresh food, make sure they are
cooled to ambient temperature.
Ice and frost layer increase energy consumption, so clean the appliance as soon
as the layer is 3-5 mm thick.
If it is the outer condenser, the rear wall should be always clean free of dust or any
impurities.
◆
The appliance should be located in the coolest area of the room, away from
heat producing appliances or heating ducts, and out of the direct sunlight.
◆
Let hot foods cool to room temperature before placing in the appliance.
◆
Overloading the appliance forces the compressor to run longer.