Vivax LED TV-32S60T2S2SM, Инструкции по эксплуатации

Страница: 200 / 220

ENG
VIVAX
45
When I turn On my
television, there is a few
second delay before the
picture appears. Is this
normal?
• Yes, this is normal. That is the TV searching
for previous setting information and initializing
the TV.
Picture is normal, but no
sound.
• Check the volume settings.
• Check if Mute mode is set "on".
Sound but no picture or
black and white picture.
• If black and white picture first unplug TV from
AC outlet and re-plug after 60 seconds.
• Check that the Colour is set to 50 or higher.
• Try different TV channels.
Sound and picture
distorted or appear wavy.
• An electrical appliance may be affecting TV
set. Turn off any appliances, if interference
goes away, move appliance farther away
from TV.
• Insert the power plug of the TV set into
another power outlet.
Sound and picture is
blurry or cuts out
momentarily.
• If using an external antenna, check the
direction, position and connection of the
antenna.
• Adjust the direction of your antenna or reset
or fine tune the channel.
Horizontal/vertical stripe
on picture or picture is
shaking.
• Check if there is interfering source nearby,
such as appliance or electric tool.
The plastic cabinet
makes a "clicking" type
of sound.
• "Click" sound can be caused when the
temperature of the television changes. This
change causes the television cabinet to
expand or contract, which makes the sound.
This is normal and the TV is OK..
Remote control does not
work.
• Confirm that TV still has power and is
operational.
• Change the batteries in the remote control.
• Check if the batteries are correctly installed.