Vivax BL-351, Руководство пользователя

Страница: 32 / 52

H
OW
T
O
U
SE
B
LENDER
After unpacking the blender, wash everything except the blender base in hot, soapy
water. Try thoroughly. Do not place in dishwasher. Wipe the blender base with a damp
cloth or sponge. Do not immerse the base in water. Care should be taken when
handling the blades, as they are very sharp.
How to assemble and Use
Important:
Your blender jar and cutting blades are subject to wear during normal use.
Always inspect cutting blades for broken, cracked or loose blades. If jar-cutting
blades are damaged, do not use. Call our toll-free customer service number to obtain
replacement parts.
Make sure blender is unplugged. Place blender base on clean, dry surface from
being pulled up into motor during operation.
Make sure small gasket is in place on outer rim of blade assembly. The jar base
firmly. The large gasket should be in place on jar bottom, underneath the wide
collar.
The blade assembly must be screwed into the jar firmly. If not, it may loosen
when the motor is turned on.
Set jar into place on blender base, making sure it is securely seated. If not gently
rock the jar seated.
Plug cord into outlet.
Put ingredients in jar. Place hand on jar.
Process food or beverages. Place hand on lid when blending liquids. Push button
on control panel to start blender.
Always turn blender OFF and wait until blades have stopped rotating before
removing jar.
To remove jar after blending complete, lift the jar straight up. If it is not easily
removed, gently rock and lift. Do not twist.
Never place jar onto unit while motor is running.
2-Speed
Speeds are 1, 2
ˈ
and Pulse. Pulse is a controlled cycle operation. This means it
operates only while the button is held down. All other speeds are continuous cycle
operate continuously at whatever speed is selected until turn the knob counter-clock
wise to the 0 position.