Vivax ACP-18CH50GEEI, Руководство по обслуживанию

Страница: 24 / 80

)XQFWLRQDQG&RQWURO
21
22
27
23
26
LOCK icon:
is displayed by pressing "+" and “-” buttons simultaneously.Press them again to clear the display.
SET TIME display:
After pressing TIMER button, ON or OFF will blink.This area will show the set time.
TURBO icon:
is displayed when pressing theTURBO button.Press this button again to clear the display.
DIGITAL display:
This area will show the set temperature. In SAVE mode,"SE" will be displayed. During defrosting operation, “H1” will be displayed.
X-FAN icon:
is displayed when pressing the X-FAN button. Press this button again to clear the display.
is displayed when pressing the AIR button.Press this button again to clear the display.(Optional for some models.)
AIR icon:
24
28
FAN SPEED display:
Press FAN button to select the desired fan speed setting(AUTO Low-Med-High).Your selection will be displayed in the LCD windows,
except the AUTO fan speed.
is displayed when pressing the I FEEL button.Press this button again to clear the display.
I FEEL icon:
29
is displayed when pressing the HEALTH button.Press this button
again to clear the display.
HEALTH icon:
25
is displayed when Pressing “TEMP” and “CLOCK” simulta-neously in Heat mode.
8
ć
Heatingicon:
30
Remote Controller Description
ON/OFF :
MODE :
1
3
2
Press this button to turn on the unit .Press this button again to turn off the unit.
Press this button to increase set temperature. Holding it down above 2 seconds rapidly increases set temperature. In AUTO mode,
set temperature is not adjustable.
Each time you press this button,a mode is selected in a sequence that goes from AUTO, COOL,DRY, FAN,and HEAT *
, as the
following:
AUTO COOL DRY
FAN HEAT
*
*Note:Only for models with heating function.
After energization, AUTO mode is defaulted. In AUTO mode, the set temperature will not be displayed on the LCD, and the unit will
automatically select the suitable operation mode in accordance with the room temperature to make indoor room comfortable.
▲
4
Press this button to set up &down swing angle, which circularly changes as below:
OFF
This remote controller is universal . If any command , or is sent out, the unit will carry out the command as
indicates the guide louver swings as:
SWING:
:
This button is used for setting Fan Speed in the sequence that goes from AUTO, to then back to Auto.
, ,
,
FAN :
5
6
Press this button to decrease set temperature.Holding it down above 2 seconds rapidly decreases set temperature. In AUTO
mode, set temperature is not adjustable.
Auto
Low speed Medium speed
High speed
▲