Vivax ACP-09CH25GETI, Руководство пользователя, Страница: 148 / 204

ƹ
Install the outdoor unit
Methods
ķǃĸǃĹǃĺ
are recommended piping ways.
ƿ
Install connection pipe
After wrapped pipe and wire, pull them though the pipe hole (as shown in fig.5).
Hang the mounting slot behind indoor unit on the pothook of the rear panel and move
it to check if it is firm enough (as shown in fig.6).
Ensure the install height of indoor unit is 2m or higher.
ķ
Right pipe
ĸ
Rear right pipe
D
ĺ
Left pipe
Ĺ
Rear left pipe
E
F
Tailings
Tailings
Fig.4
Fig.5
Fig.6
Wrapping strap
Coonection pipe
Power connect wire
Signal control wire
Align the flare of connection pipe to the joint flare of relative valve.
Tighten the nuts on connection pipe forcibly then tighten it by spanner as shown in fig.7.
Note: Too great of torque would damage nuts.
Drainage hose
Install Part