Vivax A Series, Инструкции по эксплуатации

Страница: 202 / 240

ENG
VIVAX
23
Using the Remote Control
• Turning your TV on and off
Turning off to standby mode: Press [ OK ] button on the back of TV or press
on the remote control to switch to standby mode. You can activate the
unit again by pressing [ OK ] or button.
Power indicator: Light indicates standby mode. There will be no light when
the power switch is in the off position.
► NOTE
Remove the connection from the wall power outlet if you do not intend to use the unit
for long periods, for example if you plan to be away a few days. Wait at least 5 seconds
after turning off if you want to re-start the TV.
• SOURCE :Selecting the Input Source
Select the Input Source depending on the video device you have connected
to your TV.
To select the Input Source: Press [ SOURCE ] button. When the list of Input
Source appears, press [▲/▼] to select the source, then Press [ OK ] to
connect.
• Adjusting the volume
Press [ VOL+/VOL- ] to increase or decrease the volume.
Press [ Mute ] to turn the sound off. Press [ Mute ] again to turn the sound
back on.
• Changing channels
Press the [ P ] buttons to go to the next higher or lower channel. Or,
Press the number buttons to select a channel. For example, to select channel
12, press [1], then press [2].
• Audio function
Pressing [ MTS ] button the TV screen will display the Audio options such as
Stereo, Dual I, Dual II, Mixed.
• Displaying Channel List
Press [ OK ] to display the full list of digital and analogue channels available.
• Electronic Programming Guide (EPG)
Provides convenient access to the
television programs that will be available
in the next 7 days. The information
displayed by the EPG is made available by the commercial television
networks for digital channels only. The EPG also provides a simple way to
program the recording of your favorite programs. There is no need to setup
complicated timers.