VIVAX home CH-2006FW, Руководство пользователя

Страница: 28 / 46

1. Description:
Vivax Home Convector heater CH-2006FW with blower for heating individual rooms. (Offices, living
rooms, etc.) The device is easily portable and therefore ideal for the transitional heating. The natural
convection is intensified by the blower switchable as needed. He stands firmly on stable feet. At the
temperature selector the desired room temperature is continuously adjustable.
2. Technical data:
type Rated Power voltage frequency
CH-2006FW 2000W 220-240V 50/60Hz
3. Installation & Construction
˖ ˖
1. Before using the heater as a standalone unit, you must mount the feet.
2. Attach the feet to the bottom with the four supplied self-tapping screws. Make sure that the screws are
screwed in the correct position on the lateral parts.
Put the body is the installation, make the feet on the floor.
4. Operation
˖
1
ǃ
After unpacking:
a) Inspect the device for visible damage.Do not forget to unpack the two feet. Mount the two feet at the
bottom of the unit.
b) Connect the power cord directly into a grounded outlet.
c) Connect the unit to a properly installed power outlet (at least 15A / 220V).
d) After use, remove the plug from the socket.
2
ǃ
Heating:
a) Turn the temperature knob to the right, the heater is turned on. Set the thermostat to the highest
temperature MAX.
Air outlet grille
Dig hand
Temperature control knob
Switch knob
Stands