VivaLNK VV330, Инструкция по эксплуатации

Страница: 14 / 24

i
Troubleshooting
1. This device might be damaged.
2. This device might not be worn correctly.
3. The operation temperature is too high or too low.
4. Improper or no skin preparation.
5. Incorrect attachment of adhesive.
1. Bluetooth turned off in the SDK-installed device.
2. Out of connection range.
3.Interference from other RF emitters, such as RFID,
metal detectors, medical equipments etc, in the
vicinity
Unusual Data
No data or
intermittent data
received by SDK
1. Enable Bluetooth.
2. Move the Patch close to the SDK-installed device o
3. Move far away from any electronic equipment or
change rooms or move to an open space.
4.Check if the Patch is activated.
5.Restart the SDK- installed device.
6.The Patch battery is low and charge it.
Possible Causes
Symptom
Solutions
1. Contact your device provider.
2. Recheck device’s location or contact with skin.
3. Use this device under instructed operation
temperature.
4. Prepare the skin before application.
5. Follow the instructions to attach the adhesive.
11
No BLE signal or data
transmission latency