VRP10-O
PROFIBUS-PA OPTICAL REPEATER
INSTALLATION, OPERATION AND CONFIGURATION MANUAL
______________________________________________________________________________________________________________________________
9
Figure below shows the VRP10-O side schematic setup and its terminals for connections.
Figure 1.4 - VRP10-O schematic side diagram.
The figure and table below show the repeater connections.
Figure 1.5 – Repeater frontal label.
Table1.2 - List of terminal connections for the VRP10-O repeater.
STEP BY STEP INSTALLATION:
1) Fix the two repeaters in their respective control panel DIN rails.
2) Remove protective cover from optical channels.
3) Connect modules using standard ST optical fiber.
4) Connect grounding.
5) Connect PROFIBUS-PA channel.
6) Connect 24 Vdc power supply.
7) Supply a impedance source to PROFIBUS-PA segment.
