Viva A1213364VB, Руководство пользователя

Страница: 10 / 15

10. Once unit has drained, replace silicon plug and drain cap.
Operation
Not
: in order to prevent compressor damage, the water cooler should stand
upright for at least 4 hours. Make sure the water cooler is full filled with water
before plugging in power.
1. Tear off the plastic seal or label wrapping outside of the
bottle cap, Place down the water bottle into the bottle
receptacle vertically, the bottle cap will be pierced by
the probe and bubbles will pop up while filling water into
the cooler.
2. Press down the cold and hot tap button until the water
comes out from both taps.
3. Plug power cord into a grounded power socket, the compressor will start cooling,
turn on the hot switch and hot tank start working, it may take 60 minutes to cool
water temperature down to icy cold and 15-20 minutes to heat up the hot water.
4.
To change a new water bottle, remove the bottle vertically up then repeat the step 1
and step 2.
How to use the child-safety hot water tap
First press down the child safety lock, and then
press down the button without releasing the child-
safety lock. As shown in figure
Refrigerator door
The refrigerator door must be closed tightly to make sure
The Fridge work properly.
1
2
Model:A1213364VB Page 10
IMPORTANT: Do NOT Return Dispenser To Store.
If you have a question or problem, please contact 855-VIVA-111 for assistance.