130918-2112TU-F-V2.6-V1
4
1.6 Camera Overview
■
Power / LAN LED:
(1)
Power LED:
Green
—Normal
Orange
—Abnormal
(2)
LAN LED:
Green
—Successfully Connected
Red
—Connecting
Orange
—Error
■
DI / DO Port:
(1)
485
＋
:
Controlled by RS-485 signal sent by the network part. (POSTIVE)
(2)
485
－
:
Controlled by RS-485 signal sent by the network part (NEGATIVE).
(3)
GND:
Ground
(4)
AL-O2 (Alarm Output):
No effect
(5)
AL-I2 (Alarm Input):
No effect
(6)
AL-O1 (Alarm Output):
Triggered when the alarm outputted (TTL Level).
(The alarm output signal may also be set to generate as the DAY/NIGHT Mode activated.)
(7)
AL-I1 (Alarm Input):
When activate, the alarm will be triggered.
(The input may also set to be controlled by DAY/NIGHT program.)
(8)
ALM-RST (Alarm Reset):
The system will force the alarm input to cancel.
■
RESET:
Press reset key with small screw driver, hold for a few seconds, and re-connect the power, the
camera will automatically start to reset in 5 seconds. After reset, all the settings will restored to
the default. The default IP is 192.168.1.168. After reset, IP will be restored to the default.
■
DC 12V:
DC Jack
ψ
2.1, DC12V---0.5A or higher.
■
Audio In/Out:
Audio In:
Connect with MIC (Microphone).
Audio Out:
Connect with Speaker.
■
Video In/Out:
Video In:
Connect with Analog D1(960H) Camera.
Video Out:
Connect with Monitor(BNC).
■
WAN/PoE:
Connect Analog D1(960H) Camera to PC or PoE Hub.
WAN / PoE
Power 12V DC
Micro SD /
SDHC
Mini USB
DI / DO
Audio In/Out
Video In/Out
Power / LAN
1 2 3 4 5 6 7 8
IN
OUT
Mini
USB
3.GND
1.485+
4.AL-O2
5.AL-I2 6.AL-O1
7.AL-I1
8.AL-RST
2.485 -
Power / LAN LED
