VITRONIC SCC-WD3201MOC Скачать руководство пользователя страница 2

 

 

Safety Warning

 

 

1. Read this manual carefully before installing the unit

 

Please read this manual first for correct installation and operation. 

 

2. Never install the camera on a ceiling that cannot hold its weight

 

The product may fall down and cause damages. 

 

3. Never install the camera near electric or magnetic fields

 

Install the camera away from TV, radio transmitter, magnet, electric motor, transformer, audio 
speakers since the magnetic fields generate from above devices would distort the video image. 

 

4. Never install or use the camera in areas exposed to water, oil or gas

 

The water, oil or gas may result in operation failure, electric shock or fire. Do not use this unit 
near water-for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet 
basement, near a swimming pool, in an unprotected outdoor installation, or any area which is 
classified as a wet location. 

 

5. Never face the camera toward the sun

 

Direct sunlight or severe ray may cause fatal damage to sensor and internal circuit. 

 

6. Power Cord Protection

 

Touching the wet power cord with hands or touching the power cord with wet hands may result in 
electric shock.

 

Power supply cords should be routed so that they are not likely to be walked on 

or pinched by items placed upon or against them, playing particular attention to cords and plugs, 
convenience receptacles, and the point where they exit from the appliance. 

 

7. Attachments

 

Do not use attachment not recommended by the product manufacturer as they may cause 
hazards. 

 

8. Object and Liquid Entry

 

Never push objects of any kind into this product through openings as they may touch dangerous 
voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of 
any kind onto the product. 

 

9. Do not operate the camera in environments where the temperature, 

 

   

humidity or power

 

source is beyond the specified ones

 

Use the camera in suitable environments where the temperature is within -10°C~50°C and 
humidity below 80%. Use the input power source as this instruction indicated. 

Содержание SCC-WD3201MOC




















Отзывы: