Vitrifrigo WMF CENTER COOLER, Инструкция по установке, использованию и обслуживанию

Страница: 14 / 161

171209 – rev. 01 08/18 EN
7.5 Defrosting
If the refrigerator is left to operate for very long periods of time, it is
possible for ice to form on its inside walls.
If the ice becomes considerably thick, it is advisable to defrost the
refrigerator in order to continue to guarantee good appliance efficiency
and avoid higher electricity consumption.
To defrost the appliance, switch it off, holding the button
of the
thermostat for at least 3 seconds; we recommend leaving the refrigerator
door open to speed up this operation.
Never use tools or utensils of any type to remove ice as this could
damage the evaporator, which is in contact with the inside walls of the
refrigerator.
The manufacturer cannot accept any liability for damage to the appliance
caused by failure to abide by this recommendation.
NOTE: During defrosting operation, do not leave the milk container inside
the refrigerator.
At the end of the defrosting operation, after cleaning and thoroughly
drying the insides of the refrigerator, switch it on holding button of the
thermostat for at least 3 seconds.