LONG REACH SANDER
Owner’s Safety and Operating Manual
SAFETY INSTRUCTIONS
The following pictograms appear throughout these operating instructions:
2
USE CORRECT SUPPLY VOLTAGE:
The power supply voltage must match the information
quoted on the identification plate.
USE A PROPER EXTENSION CORD:
Only use an approved extension cable that is suitable
for the machine’s power. The cord must have a diameter of at least 1.5mm
2
. When the
extension cable is on a reel, unroll the cable in its entirety.
SWITCH OFF THE MACHINE IMMEDIATELY IN CASE OF:
1. Malfunction in the mains plug, power cable or damaging of cable.
2. Broken switch.
3. Smoke or smell of scorched insulation.
GENERAL SAFETY RULES
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) sander.
1) WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can
cause you to lose control.
Read through these operating instructions carefully before using the sander. Become familiar
with the functions and method of operation. To ensure proper operation, always maintain the
sander according to the instructions. The operating instructions and associated documents
should always be kept close to the sander.
When using power tools, you must observe the following basic safety precautions in order
to ensure protection from electric shocks, injury and fire. Read and follow all the instructions
before using this power tool.
Indicates the presence of electric shocks.
Indicates danger of injury and possible damage to the appliance if these instructions
are not followed.
Always check if your mains voltage corresponds with the value on the type plate
The machine has been double-insulated in accordance with EN60745: therefore, an
earth wire is not necessary
099502511-Long Reach Sander Owners manual_2017.indd 3
14/07/2017 11:10
