VITO VIAC4, Инструкция по эксплуатации

Страница: 23 / 40

Do not use power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases
or dust. Power tools create sparks that can ignite liquids,
gases, or dust.
The supply voltage must match the technical
specifications of the power tool. Keep the voltage
between ± 5% of the rated value. Do not operate the power
tool in places where the supply voltage is not stable. The
power cord must be plugged into socket with differential
protection and earth terminal.
If the workplace is extremely hot, humid or with a high
concentration of dust, the socket circuit must be protected
with a circuit breaker (30 mA) to ensure the safety of the
user.
Do not expose the power tool to rain or use it in wet or damp
conditions. The presence of water in a power tool increases
the risk of damage and electric shock to the user.
Never use the power cord to pull, carry or unplug the power
tool. Damaged power cords increase the risk of electric
shock.
Keep the power cord and plug away from heat sources, oil
and sharp objects. Check the condition of the power cord
regularly, if it is damaged, it must be replaced or repaired
by a qualified technician.
Never change the power cord plug and use a socket which
is compatible with the plug. Do not use any kind of socket
adaptor.
Do not operate the vacuum cleaner with wet hands or
barefoot.
Always keep the anti-static chain placed at the base of the
vacuum cleaner and in contact with the floor.
The use of extension cords to plug in the power cord is not
recommended. However, if you use an extension cord, you
should take some precautions, such as:
▪
Only use extension cords with 3 conductors, plugs and
sockets with earth terminal;
▪
The cross- section of the extension cord’s conductors
shall be proportional to the length and with the same
characteristics as or larger than the vacuum cleaner’s
power cord;
▪
Do not use damaged extension cords. Examine the
extension cords before using them and replace if
necessary;
▪
Always unplug the extension cord before removing the
plug from the power tool;
▪
When using an extension cord reel, unroll the cord
completely.
The power tool is double-insulated, according to EN
60745 standard. No grounding is necessary.
Individuals who have not read the instruction manual and
are not familiarized with how to operate the ash vacuum
cleaner must not use it.
To ensure that you work with the power tool safely, you
should consider a few precautions and procedures before
start-up:
▪
Check that the appliance and accessories are correctly
assembled and in good condition. Never use damaged
accessories or parts;
▪
Check that all nuts and bolts are properly tightened.
Regular servicing is important to ensure safety issues
and a good performance of the power tool;
▪
Check that the safety devices are in perfect condition
and work properly. Never use the power tool if the safety
devices are missing, inhibited, damaged or worn out;
▪
Ensure the switch is off when connecting the power cord.
If the ON/OFF switch is damaged or does not allow the
operation of the power tool to be controlled, it must be
repaired or replaced in order to prevent any
unintentional start.
Perform all adjustments and work necessary for the correct
assembly of the vacuum cleaner. If you have any questions
or difficulties, contact your official dealer.