Vitl Lu-Mini, Инструкция по эксплуатации

Страница: 62 / 85

Instructions for Use
62
The available Sample Measurement Protocols table data fields are listed in
Table 20 below.
Table 20: Protocols Table Data Fields
Active
Selects whether protocol is downloaded to unit

Below
Protocol Name
Unique name for this protocol

7.7.1
Description
Description of the protocol

7.7.1
Assay
Assay name from Reagent Assay Table

7.7.1
Scaling Factor
Assay reading scaling factor

7.7.1
Sample Method
Sample method (S, C, C+1S to C+6S)

7.7.2
Measurement
Type
Sample measurement type

7.7.3
Show Graph
Show data progress graph for long
measurement times

7.7.3
T1
Result analysis start time t1 in seconds

7.7.3
T2
Result analysis end time t2 in seconds

7.7.3
Window
Result analysis window size in seconds

7.7.3
Threshold
Percentage change threshold limit

7.7.3
Result DPs
Result display number of decimal-places

7.7.4
Result Units
Result Units-of-measurement

7.7.4
Lock Status
Prevent user from changing the result status

7.7.2
Result Banding
Result colour banding data

7.7.2
Limit Result
Limit result value to maximum/minimum bands

7.7.2
Comparison
Bands
Comparative result acceptance range data

7.7.2
Show Relative
Show comparative result as relative percent

7.7.2
Notes
Optional: Additional notes

7.2.4
The
Active field can be used to specific which Protocols will be downloaded
to the Lu-mini Units. This is handy when developing new or experimental
Protocols to select only the active definitions.
Please refer to the relevant Sections for specific details on field usage.