5
MicroLinks Technology Co., Ltd.
(2) Flush-way: there are only two focuses in flush observation.
Adjust Focus dial by turning left for low mag (10x) or turning
right for high mag (40x) to observe. Turn left to get smaller
mag and right for larger one. Adjust Focus dial to move the
symbol of magnification in the middle. Then, slightly adjust
the focus to get the clearest image. In the way of flushing, the
observed article shall be plat without any concavo or convex.
Otherwise, the symbol cannot be placed in the middle, nor the
scale can be displayed correctly.
(3)
Long Shot (
): Adjust Focus button to move symbol
of
to the middle position, then slightly adjust it to get the
most clear image. After focusing, shoot or photograph as the
way of camera. In the long shot, you can choose the mode of
camera [please refer to (C) of item (1) of Section 1.4].
1.4
Program Functions of Microscope
There are 8 function modes in the program interface. Press
Function Menu
/Delete
button to switch functional modes
in the Camera. In other modes, press the button of Preview Photo
/Back
to back to the Menu and switch function as
displayed in the following image:
(1)
Camera
: Observation mode.
Please refer to the above image. Small icons are used to
represent function modes:
