VITINNI TB-6010A, Инструкция по эксплуатации

Страница: 5 / 8

•
This appliance can be used by persons with reduced physical, sensory or mental
capacities or lack of experience or knowledge only if they have been given
supervision or instruction concerning use of the appliance in a safe way and
understand the hazards involved.
• Care should be taken handling the sharp cutting blades, emptying the bowl and
during cleaning.
Caution
•
Do not immerse the power cord, plug or housing in water or under the tap during
cleaning.
•
Unplug the Table Blender from the wall socket when not in use or before cleaning.
•
Do not use any accessories other than those provided.
• Ensure the accessories are clean and dry before putting the food inside.
•
If the power cord becomes damaged, it must be replaced by the manufacturer, its
service agent or a similarly qualified person.
•
Keep the Table Blender and the power cable out of reach of children.
• The Table Blender must not be operated by means of an external timer or separate
remote-control system.
Before First Use
•
Remove all packaging materials, stickers and labels.
•
Clean with hot soapy water, using a non-abrasive sponge.
•
Ensure the inside and outside of the Table Blender are completely dry.
Using Your Table Blender
When you plug in the Table Blender, the three function buttons will light up with a blue flashing
light.
After the glass Jug is fitted, the lights will stop flashing.
The Power on/off button allows you use a variety of speeds from low to maximum power.
The start power on/off button allows you to use 3 speeds:
•
Speed 1 (slow): Rotate to position 1
• Speed 2 (medium): Rotate to position 2
•
Speed 3 (fast): Rotate to position 3
When you use power on/off button for your speed control, the function buttons cannot be used.