5
Description of Parts
BEFORE USE
Before use, check all accessories are complete and that the equipment is not
damaged. The Multi-Function Vacuum Power Blender should be cleaned according
to the instructions in the Cleaning and Maintenance section.
Before first use the Multi-Function Vacuum Power Blender should be run through an
operational cycle filled with water.
When using the Multi-Function Vacuum Power Blender for the first time a slight odor
may be emitted. This is normal and will soon subside.
NOTE:
Care should be taken when handling the sharp cutting blades,
emptying the jug or bottle and during cleaning.
6
Preparation – Normal and Vacuum Blending with the Jug
Processing ingredients in vacuum allows you to prepare drinks and smoothie from
fruits, vegetables and water or other liquids without undesirable oxidation.
Place the motor unit
(A6)
on a flat, stable surface. Do not connect the motor
unit to the power supply until the blender has been fully assembled.
If using the blender jug
(A4)
, screw the blade assembly
(A5)
firmly onto the
bottom of the blender jug
(A4)
.
Put the ingredients into the blender jug
(A4)
then place the lid
(A3)
on top and
push gently down to close.
NOTE:
The maximum capacity for the Blender Jug is 1.5L
To use the blender with the vacuum unit
(A7)
, insert the vacuum inner lid
(A2)
into the hole. Place the vacuum unit
(A7)
onto the vacuum inner lid
(A2)
and
press the power button to operate. The vacuum unit will turn off automatically
once a vacuum has been created inside the blender jug
(A4)
and can be
removed from the lid.
To use the blender
without the vacuum unit
(A7)
, insert the inner lid
(A1)
into
the hole in the lid
(A3)
.
Place the blender jug
(A4)
on the motor unit
(A6)
, align the handle of the
blender jug
(A4)
with the arrow symbol on the motor unit
(A6)
and then turn
clockwise until you feel resistance to lock.
The blender is now ready to be operated according to the Operating
instructions
Preparation – Normal Blending with the Storage Bottle
Place the motor unit
(A6)
on a flat, stable surface. Do not connect the motor
unit to the power supply until the blender has been fully assembled.
Put the ingredients into the 0.7L Storage Bottle
(A10)
.
NOTE: T
he maximum capacity for the Storage Bottle is 0.7L.
Screw the blade assembly
(A5)
firmly onto the storage bottle
(A10)
.
Turn the storage bottle
(A10)
upside down and place it on the motor unit
(A6)
.
Projections on the storage bottle
(A10)
must fit into the slots on the motor unit
(A6)
. Turn the storage bottle
(A10)
clockwise until you feel the resistance
to lock.
The blender is now ready to be operated according to the Operating
instructions
NOTE:
The storage bottle cannot be used for Vacuum Blending
