1DU00L7B-A.1
9
Caring for your LED Monitor
Your VITEK LED color monitor is a sensitive piece of electronic
equipment. Proper care can prevent accidentally damaging the
LED panel or the monitor itself. By following these guidelines you can
ensure many years of trouble free use.
1.
The LED monitor's plastic casing and LED glass panel can be
cleaned with a soft, lint-free cloth.
Never use scrub pads or other
cleaning materials with abrasive surfaces to clean your LED
monitor!
a.
For the plastic case, a mild detergent may be used to clean
the surface. However, you should ensure not to use too
much detergent or water as this could leak into the interior
of the casing.
2.
Do NOT use cleaning fluids based on alcohol, methylated spirit, or
ammonia. The glass plate has a hard surface coating to prevent
scratches. However, the use of strong chemical cleaning agents
may damage this coating. Use only a mild soap or detergent and
water or specially formulated cleaners made for cleaning glass
panels.
3.
Avoid direct contact with water or other liquids. Never use your
LED monitor in or around areas where water may pose a potential
hazard to normal operation.
4.
Only use your LED monitor indoors, and avoid monitor contact
with oil, vapor, steam, moisture and dust. Your LED monitor should
be used in a clean and low humidity environment.
5.
Keep your LED monitor away from heaters or other heat sources
such as lighting equipment or direct sunlight.
6.
Do not touch the Screen of your LED monitor with any sharp
object such as your fingernail or a pencil etc.
WARNING: Any unauthorized modification to this product could result in the
revocation of the authorization to operate the equipment and void the
product warranty.
4
Caring for Your L
E
D Monitor
