3 3
Installation
Before beginning installation, make sure that the wall or ceiling is strong
enough to withstand 3 times the weight of the camera. The mounting
steps are as follows:
1. a) Unscrew the cover at the rear
of the ‘ball’ and insert a MicroSD
card. Re-install the cover, make
sure it is firmly in place. Re-install
the ball using the fixed screws.
Install a MicroSD Card
1. Loosen the screws
to diassemble the
camera.
2. Drill screw holes and cable
hole in the according to
drill template. Then route and
connect the cables, including
the weather resistant security
cap using the instructions
above.
Weather Resistant Network Coupler
1. Loosen the nut from the Weather Resistant Network Coupler,
2. Run ethernet cable through coupler, then attach a RJ-45 connector.
3. Tighten the nut and coupler for a weather resistant seal.
1.92”
.96”
3.23”
.18”
3.84”
4.23”
