ULTRA CLEAR RESOLUTION CAMERA
Operating Instructions
21
DAY->NIGHT and NIGHT->DAY operations must be examined and
verified at the final installation.
Block the lens for a few seconds for NIGHT mode and release and let it
return to DAY mode. If camera stays at NIGHT mode more than 10sec,
decrease NIGHT->DAY THRES a little and repeat the fore-mentioned
steps. If the scene is too dim or lens iris was adjusted too low(near close),
it may not return to DAY.
IMPORTANT ACTIVITY
IR OPTIMIZER SETUP
MODE
IR AREA
LEVEL
IR LED
COLOR NIGHT
IR SHADE COMP
02
RETURN
AUTO
---
DAY/NIGHT
OFF
ON
IR LED AUTO
LEVEL MIN
LEVEL MAX
006
RETURN
255
1-7. IR OPTIMIZER
(default: OFF)
This function is effective built-in LED models in NIGHT mode only.
If subjects which can cause overexposure are located near the monitored area,
you can adjust IR OPTIMIZER level or area.
●
OFF : Object which is strongly illuminated by IR LED can saturate.
● ON : Object even which is strongly illuminated by IR LED can be managed not
to saturate. Side areas which are weakly illuminated can be compensated to bright
up depending on the case. Noise may increase at the entire video.
IR OPTIMIZER OFF
IR OPTIMIZER ON
20
