ULTRA CLEAR RESOLUTION CAMERA
Installation Instructions
10
1. Place the mounting template at the installation position and drill the wall.
Insert the anchors into the drilled holes
2. Place the foot bracket(option) on pre-drilled position and attach using the mounting
screws. Skip this step when a foot bracket is not installed.
3. Route the Power cable to the connecting place.
Attach the camera bracket through using mounting screws (4x30mm).
4. Set the camera’s viewing angle and adjust zoom/focus of lens by using the
torque wrench.
Torque Wrench (5mm)
Mounting Screw
: 4x30mm
1
3
Pan & Tilt adjustments
• Unlock the screw on the camera
bracket through using the torque
wrench(5mm) supplied.
• Set the camera’s viewing angle
then lock the screw on the bracket.
Plastic Anchor
: 6 x 30mm
Foot Bracket
(Option)
2
Tilt
Inclination
Pan
9
