Vitek VTC-BM3FP, Руководство пользователя

Страница: 22 / 32

Operating Instructions
Improves the visibility for the bright areas and the dark areas by compen-
sating the video gain. Care should be taken to select low, middle or high level,
because video may lose its quality in some environments by over
compensation. Video noise can be increased in the dark area accordingly
8-6-1. MODE :
8-6-2. LEVEL : Set Low, Mid or High.
Video quality can be less in normal environments.
8-7-1. ZONE NUM : Selects mask zone number from 0 to 15 to be adjusted.
8-7-2. ZONE DISP: Displays OFF/ON for the mask area which you selected.
8-7-3. H-POS, V-POS :
Adjusts the mask area H, V position which you selected.
Set ON/OFF for enabling/disabling PRIVACY mask. 16 privacy areas are
available and each area is programmable in size, color, position and
transparency.
• AUTO : Enhance foggy video automatically according to status of scene.
• MANUAL : Set to enhance foggy video manually regardless of status
of scene.
Adjust gamma level of video.
8-2. GAMMA
The Video is reversed left and right if turned ON.
8-3. MIRROR
The Video is reversed upside down if turned ON. When the video is fliped
Vertical, then the joystick directions are reversed accordingly. It is very
useful when a camera is installed upside down.
8-4. FLIP
8-5. D-WDR
8-6. DEFOG
8-7. PRIVACY
Enhance foggy video according to status of scene. Video quality can be
less in normal environments. Sets AUTO or MANUAL mode.
Sets the Sharpness level 0~10. Increases or decreases the sharpness of
the picture. Too much sharpness can make image harsh and show more
noise as well as line flicker at the edge of object in the picture.
8-1. SHARPNESS
22 23