Transcendent NVR Series
35
Ø
Add Scheme
Click
in area � to create a new scheme. Click
on the top right corner of the
scheme to delete it.
Ø
Configure Scheme
a)
Select a scheme in area � and then click the screen mode button on the tool bar to set the
screen mode of the scheme.
b)
Select a camera window in area � and then double click the camera or group in area �.
The camera or group will be added into the selected window. One camera in the same scheme
cannot repeat. You can click the right-click menu “Clear” in area � to remove a single camera
or click
to remove all the cameras.
c)
Click “Apply” to save the settings.
Ø
Start Sequence View
Go to live preview interface and then click
to pop up a window. Set the dwell time in the
window and then click
to start scheme view in sequence. Double click the sequence view
interface to pause the view; double click again to restore the view. Click
to stop the
view.
5.3 Preview Image Configuration
5.3.1 OSD Settings
Click Start
à
Settings
à
Camera
à
Image
à
OSD Settings to go to the interface as shown below.
Select the camera, input the camera name (or double click the camera name in the camera list
to change the camera name), enable or disable the name and time OSD (if enabled, drag the red
name and time OSD directly in the image view area to change the OSDs’ display position) and
Содержание VT-TNR3216P
Страница 97: ...Transcendent NVR Series 96 Fig 11 1 Fig 11 2 ...
