Vitek VT-PTZ10T, Руководство пользователя

Страница: 24 / 44

23 24
VT-PTZ10T
SHORTCUT TO PROGRAMMING PRESETS.
Select direction of the camera, zoom and focus to be programmed, and then press no.
(
1~128
), and then press
SHFT
,
PRST
subsequently. The current view will be stored
to the selected preset number if position is empty. If selected preset number is not
empty, “PRESET EXISTING” message will be displayed on the monitor and you will be
prompted to overwrite.
Example :
1
,
0
+
PGM
+
PRST
will memorize current view as preset No. 10 . In this
case, focus and Iris mode will be memorized as auto and dwell time will be set to 3 sec.
3.1.3 SCAN (MENU => FUNCTIONS => SCAN or Shortcut:
SCAN
)
The Scan function supports up to 4 programmed sections of angles at 8 programmable
speeds.
SPEED (MODE): 1/ 2 / 3/ 4/ 5/ 6/ 7/ 8
1: SLOWER ↔ 8 FASTER
DiagonalScan shows moving path from start point to end point
including tilt and zoom** simultaneously.
**Some models do not change zoom ratio
SCAN MENU 01/08
SCAN 01 : AUTOSCAN01
SPEED : 1~8/SLW/MID
START : NONE
END : NONE
DIRECTION : CCW
SWAP : OFF
SAVE AND EXIT