55°
55°
PRIOR to USE
PARTS SUPPLIED
DIMENSIONS
SPECIFICATIONS
Install the mount onto a strong structure such as a concrete or steel beam, etc.
Use the supplied accessories when installing the mount to a structure, make sure
that all the screw parts are metallic.
Follow the mounting instructions based on the assigned marks to the camera
or mounting accessory in the Reference Section below.
Straps
Mounting Screws
2.5mm, 3mm
M4x20
Construction:
Finish:
Environment:
Pole Size:
Steel
Light-gray
Indoor/Outdoor for a pole like
structure
Ø
3.94” - 7.87” (100~200mm)
Mount Adaptor
Instruction Guide
Washers
L-Wrench
C-sunk M4x20
INSTALLATION
1. Feed the straps through the vertical slits located on the four corner of the mount adapter.
2. Wrap the straps around the pole then use the driver to rotate the screw that is attached at the ends of
the straps. Rotating the screw shorten the straps thereby fastening the mount around the pole.
3. Attach the cameras* to the pole mount adapter predetermined their mounting holes.
(*) Using the supplied screws with the camera packing you wish to mount.
Weight:
2.6 lb (1.2kg)
VT-MV/PLMT
Pole Adapter for AFZ Dome
Cameras and AFZ Bullets
1.93” (49.1mm)
3.01” (76.5mm)
6.06” (154mm)
7.48” (190mm)
0.39” (10mm)
1.02” (26mm)
