Vitek VT-EHP Series, Руководство пользователя

Страница: 41 / 111

VT-EHP
40
SYSTEM SETUP
NETWORK: DDNS
DDNS : When enabled, the DVR can be accessed through a Dynamic DNS server.
Commonly used if a broadband connection does not have a static IP address.
***CAUTION***
To use the DDNS function, ports 8080 and 5554 MUST be opened. (This is commonly known as port forwarding ).
a. Default WEB SERVER PORT: 8080
b. Default RTSP SERVICE PORT: 5554
NOTE : The default DDNS HOST NAME is set to the MAC (Media Access Control) address.
CREATING YOUR DDNS HOSTNAME
The EHP series allows you to actually name your DVR, and access it by that name.
Steps
1) Access the DVR ’ s main menu by using the remote control, or by the buttons on the front of the unit
2) The Setup box will appear. Select
“
System Setup
”
3) Select
“
Network
”
4) Select “ DDNS ”
5) Make sure DDNS is turned
“
ON
”
DVRLINK.NET CONFIGURATION
1) Make sure DDNS is turned ON
2) Highlight HOST NAME and press enter. The virtual keyboard will appear. Change the Host Name to your desired name
by removing the previous entry--you can do this by repeatedly selecting the ß key. (When choosing your host name,
please don ’ t include any spaces or special characters). Once you have entered your desired host name, select OK.
4) Select
“
CHECK
”
under DDNS Registration to make sure the name is available.
5) Select “TEST” under DDNS Connection to make sure you have a connection to the server
6) Select APPLY at the bottom of the screen to apply your changes
7) Bring up a browser (ex. Internet Explorer), and type: http://your-ddns-hostname.dvrlink.net:8080 in the address bar.
For example: If your DDNS Host Name was Johndoesdvr, you would type: http://johndoesdvr.dvrlink.net:8080
NOTE: If you changed the webport, you will need to use that number, NOT 8080.