START THIS UNIT
Basic Operation
Before using the DQR, please have a HDD installed ready. (refer to Appendix #1 for installation or removal of a HDD).
Connect the AC Power Cord with Power Adapter and plug into an electrical outlet. The Red LED indicator light will be
ON and the DQR is in Standby mode.
1.
Press the Power button. The POWER LED will turn from red to orange, and other red LED indicators will turn ON. It
takes approximately 5 to 15 seconds to boot the system with the message : “ HDD Detecting ”. Once connected, the
POWER LED will change to green color, and the Alarm and Timer LED will be ON.
2.
3.
Before operating the DQR, please set up the system time first. (for setting system time, please refer to page.11).
NOTE : When “HDD not found” message shows up, please refer to appendix # 1. As the HDD is likely not
installed correctly.
OPERATION
RECORDING
The DQR offers a variety of recording modes, such as record continuously, at scheduled time, and by events. You can set
up recording speed and resolution. You can set these options by selecting MENU / RECORD before recording, please
refer to page.13. Under the recording status, if power is off accidentally, recorded video will still store in the HDD. DQR
will return to original recording situation after power returns again.
On the screen, you will find the date, time, HDD recording type, the amount of available GB left in the HDD memory and
the letter “A” represents the method of recording that is occurring.
(OW : HDD Overwrite)
NOTE : When the HDD is full under O/W Recording mode, previous recorded files
may be overwritten without further warning notices.
There are 4 recording modes in which Recording can occur : Alarm, Timer, Manual and External Record.
1. ALARM RECORD
When DQR is triggered by an alarm input, it will record immediately. Indicated by the letter “A” and show
!
diagram
on the triggered channel.
2. TIMER RECORD
When recording is scheduled by a Timer. Indicated by the letter “T”.
3. MANUAL RECORD
When recording is initiated by manually pressing the REC button. Indicated by the letter “M”.
4. EXTERNAL RECORD
When recording is triggered by an External device. Indicated by the letter “E”.
2002 – JAN –01 01:02:03
A
●
OW
8
