6
ENGLISH
–
Use the on/off/temperature setting button (6) «
» to set
the necessary operating surface (2) temperature within
the range from +160°С to +200°С.
Hair type
Temperature
For fine hair, sensitive to high temperature
160 °С
For normal wavy hair of medium thickness
180 °С
Hard, thick, curly hair
200 °С
Note: while setting the temperature, remember that the
operating surface heats up fast but cools down much longer.
–
Once the operating surface (2) reaches the set tempera-
ture, the flashing temperature symbols on the indication
panel (5) will glow constantly.
–
Take a hair lock with the free hand.
–
Press the clamp handle (4), place the end of the lock on
the operating surface (2) and move the clamp (4) down.
Holding onto the protecting tip (1) and handle (7), wind the
lock around the operating surface (2).
–
Wait for a while, then press the clamp handle (4) and
release the hair lock.
–
Repeat this procedure on the rest of your hair.
Notes:
–
when using the unit for the first time, a foreign smell can
appear. It is normal.
–
do not touch the operating surface (2) during the unit
operation, hold the unit by the protecting tip (1) with one
hand and by the handle with the other (7).
–
during breaks in operation, place the unit on the safety
stand (3) on a flat heat-resistant surface.
–
do not comb the hair right after curling it, let it cool down,
divide big locks into smaller ones carefully to make the
hairstyle look natural.
–
After you finish using the unit, switch the unit off by press-
ing and holding the button (6) «
», the indication panel
(5) will go out, then unplug the unit.
Note:
- if the on/off/temperature setting button (6) «
» has
been pressed during 30 minutes, the curling tongs will be
switched off automatically.
Put the unit on the safety stand (3) on a flat heat-resistant
surface and let it cool down completely.
IM VT-8427.indd 6
25.01.2018 17:39:04
