6
ENGLISH
•
Before plugging the unit in make sure that the operat-
ing voltage of the unit corresponds to the voltage of
your mains.
HAIR STRAIGHTENING
•
The unit can be used for both long and short hair.
•
Use the unit only on healthy undyed and not permed hair
or use it along with special hair straightening products.
•
If your hair has been dyed or permed, use the unit rarely.
•
For the best results the hair should be clean and dry.
•
Open the straightener by turning the lock (1) clockwise.
•
Put the unit on a flat steady and heat-resistant surface.
•
Insert the plug into the mains socket, the «OFF» sym-
bols will appear on the display (5).
•
Switch the unit on by pressing and holding the on/
off button (2), the default heating plates temperature
«190°С» will light up on the display (5) and the heat-
ing scale will appear on the left side of the display (5).
Note: During the first operation some smell from the heat-
ing element is possible, this is normal.
•
If necessary, set the required heating plates tempera-
ture by pressing the buttons (3).
Hair type
Temperature
Damaged, colored,
bleached, fine
from +150°С to +180°С
Normal
from +180°С to +210°С
For professional styling
from +210°С to +230°С
•
When the heating plates reach the set temperature, the
heating scale will glow constantly.
•
Divide combed hair into locks of equal width (about
5 cm).
•
Place the hair lock between the plates (4).
•
Hold the unit by its handle and press the plates (4)
together.
•
Slide the heating plates (4) with little force to the hair
tips.
IMPORTANT: do not keep the plates on the same area of
the hair lock for more than 2 seconds.
IM VT-8416_70x130.indd 6
09.01.2018 17:53:40
