6
ENGLISH
•
Check the unit for damages, do not use it in case
of damages.
•
Before plugging the unit in make sure that the oper-
ating voltage of the unit corresponds to the voltage
of your mains.
HAIR CRIMPING
•
Use the unit only on healthy undyed and not permed
hair or use it along with special hair straightening
products.
•
If your hair has been dyed or permed, use the unit
rarely.
•
For the best results the hair should be clean and dry.
•
Put the unit on a flat steady and heat-resistant sur-
face.
•
Insert the plug into the mains socket.
•
Switch the unit on by pressing the power switch but-
ton (4), the indicator (3) will light up.
Note: During the first operation some smell from the
heating element is possible, this is normal.
•
Divide combed hair into locks of equal width (about
2 cm).
•
Place a hair lock between the heating plates (1).
•
Press the hair lock between the heating plates (1)
near the hair roots and create crimps throughout
the hair length.
•
Do not slide the unit throughout the hair lock length,
just press the heating plates (1) together to make
crimps.
IMPORTANT: do not keep the heating plates on the
same area of the hair lock for more than 2 seconds.
•
After that start styling the next hair lock.
•
Cool your hair down before final styling or applying
hair spray.
•
Avoid contact of heated surfaces with your face,
neck and other parts of your body.
•
After you finish using the unit switch it off by pressing
the power switch button (4) and then unplug it. Let
the unit cool down.
IM VT-8408_70x130.indd 6
05.06.2018 17:22:38
