6
ENGLISH
•
Unpack the unit and remove any stickers that can pre-
vent unit operation.
•
Unwind the power cord to its full length.
•
Check the unit for damages, do not use it in case of
damages.
•
Before plugging the unit in make sure that the oper-
ating voltage of the unit corresponds to the voltage
of your mains.
HAIR STRAIGHTENING
•
The unit can be used for both long and short hair.
•
Use the unit only on healthy undyed and not permed
hair or use it along with special hair straightening
products.
•
If your hair has been dyed or permed, use the unit
rarely.
•
For the best results the hair should be clean and dry.
•
Press the lock (5) to open the heating plates.
•
Put the unit on a flat steady and heat-resistant sur-
face.
•
Insert the plug of the cord into the socket, set the
power switch (4) to the «ON» position, the power indi-
cator (2) will light up and be flashing.
Note: During the first operation some smell from the
heating element is possible, this is normal.
•
Set the required temperature using the wheel (3)
Hair type
Temperature
Damaged, colored,
bleached, fine
from +100°С to +160°С
Normal
from +160° С to +180° С
For professional styling
from +180° С to +220° С
•
Let the unit heat up to the required temperature, the
indicator (2) will glow constantly.
•
Divide combed hair into locks of equal width (about
5 cm).
•
Place the hair lock between the plates (1).
•
Hold the unit by its handle (6) and press the plates (1)
together.
IM VT-8405_70x130.indd 6
27.07.2017 11:50:34
