Vitek VT-8400 BK, Инструкция по эксплуатации

Страница: 7 / 36

7
ENGLISH
•
Hold the unit by its handle and press the plates (4)
together.
•
Slide the heating plates (4) with little force to the
hair tips.
IMPORTANT
: do not keep the plates on the same area
of the hair lock for more than 2 seconds.
•
After that start straightening the next hair lock.
•
Cool your hair down before final styling or applying
hair spray.
•
Avoid contact of heated surfaces with your face, neck
and other parts of your body.
•
After you finish using the unit press and hold the on/
off button (2), the display (5) will go out; unplug the
unit. Wait until the unit cools down completely.
Note:
– Always switch the unit off and unplug it if it is not used.
– Never leave the unit connected to the mains unat-
tended; if you forgot to switch the unit off, it will be
switched off automatically in 60 minutes.
– You can form a lock by clamping the lock end and
wrapping the hair around the outer surface, wait a
little and remove the lock from the unit.
CLE ANING AND CARE
•
Before cleaning, unplug the unit and let it cool down
completely.
•
Never immerse the unit into water or other liquids.
•
Wipe the heating plates and the unit body with a soft
damp cloth and then wipe them dry.
•
Do not use steam cleaners.
•
Do not use abrasives and solvents to clean the unit.
STORAGE
•
Always unplug the unit if it is not being used.
•
Let the unit cool down completely before taking away
for storage.
•
Never wind the power cord around the unit, as it can
damage the cord.
•
For easy storing press the heating plates together
and press the lock (5).
•
You can store the unit by hanging it by the loop (6)
provided that no water gets on it in this position.
•
Keep the unit away from children in a dry cool place.
IM VT-8400_70x130.indd 7 22.06.2017 14:40:20