Vitek VT-8317, Инструкция по эксплуатации

Страница: 3 / 32

3
ENGLISH
STEAM IRON VT-8317
The iron is intended for ironing clothes and bedding
and for vertical steaming of fabrics.
DESCRIPTION
1.
Water spray
2.
Water inlet lid
3.
Continuous steam supply knob
4.
Water spray button
5.
Burst of steam button
6.
Handle
7.
Power cord protection
8.
Base
9.
Heating element on/off indicator
10.
Water tank
11.
Temperature control knob
12.
Self-clean button
13.
Maximum water level mark
14.
Soleplate
ATTENTION!
For additional protection it is reasonable to install a
residual current device (RCD) with nominal opera-
tion current not exceeding 30 mA. To install RCD,
contact a specialist.
SAFETY MEASURES
Before using the electrical unit, read this instruc-
tion manual carefully and keep it for future ref-
erence.
Use the unit for its intended purpose only, as
specified in this manual. Mishandling of the unit
may lead to its breakage and cause harm to the
user or damage to his/her property.
• Before switching the unit on, make sure that
your home mains voltage corresponds to the
iron operating voltage.
• The power cord is equipped with a «euro-
plug»; plug it into the socket with a reliable
grounding contact.
•
To avoid risk of fire, do not use adapters for
plugging the unit in.
• To avoid mains overloading, do not switch
several electrical appliances on with high
power consumption at a time.
• Do not use the iron outdoors and in places
with high humidity.
• Place the iron on a flat stable surface or use a
stable ironing board.
ATTENTION! The surfaces of the iron get hot
during operation. Keep open skin areas away
from iron hot surfaces or outgoing steam to
avoid burns.
•
Do not fill the water tank with scented liquids,
vinegar, starch solution, descaling reagents,
chemicals etc.
•
Do not switch the unit on in places where
aerosols are sprayed or highly flammable liq-
uids are used.
•
To avoid damaging the soleplate be very care-
ful when ironing clothes with metal zippers or
buttons.
•
Make sure that the power cord is not on the
ironing board and it doesn’t touch hot sur-
faces and sharp edges.
• Never leave the unit connected to the mains
unattended. During breaks in operation and
when the iron is cooling down, put the iron on
the base (in a vertical position).
•
Before plugging/unplugging the iron, set the
temperature control knob to the minimum
position and switch the continuous steam
supply off.
• Always unplug the iron if you are not using it.
• Always take the power plug out of the mains
socket before filling the water tank with water.
• The water inlet lid should be closed during
ironing.
•
To unplug the iron, always hold the power
plug, never pull the power cord.
•
To avoid electric shock, do not immerse the
iron, the power cord and the plug into water
or any other liquids.
•
Before taking the iron away, let it cool down
completely and pour out the remaining water.
•
Pour out water from the water tank only after
unplugging the iron.
• Clean the unit regularly.
•
Do not touch the unit body and the power plug
with wet hands.
• Do not allow children to touch the iron body
and the power cord during operation.
• Do not leave children unattended to prevent
using the unit as a toy.
•
For children safety reasons do not leave poly-
ethylene bags used as packaging unattended.
Attention! Do not allow children to play with
polyethylene bags or packaging film. Danger of
suffocation!
•
This unit is not intended for usage by children.
Place the unit out of reach of children during
operation and cooling down.
•
The unit is not intended for usage by physi-
cally or mentally disabled persons (including
children) or by persons lacking experience or
knowledge if they are not under supervision of
VT-8317.indd 3 7/5/19 2:26 PM