6
ENGLISH
– Insert the plug into the mains socket.
– Switch the unit on by setting the power switch (6) to the
position «I», the light indicator (5) will light up.
– Wait for some time required for the operation surface (2)
heating.
– Take a hair lock with the free hand.
– Press the clamp handle (4), place the end of the lock on
the operating surface (2) and move the clamp (4) down.
Holding onto the protecting tip (1) and handle (7), wind
the lock around the operating surface (2).
– Wait for a while, then press the clamp handle (4) and
release the hair lock.
– Repeat this procedure on the rest of your hair.
Notes:
– when using the unit for the first time, a foreign smell can
appear. It is normal.
– do not touch the operating surface (2) during the unit
operation, hold the unit by the protecting tip (1) with one
hand and by the handle with the other (7).
– during breaks in operation, place the unit on the safety
stand (3) on a flat heat-resistant surface.
– do not comb the hair right after curling it, let it cool
down, divide big locks into smaller ones carefully to
make the hairstyle look natural.
– After the unit operation, switch the unit off by setting the
power switch (6) to the “0” position and unplug it.
– Put the unit on the safety stand (3) on a flat heat-resis-
tant surface and let it cool down completely.
CLEANING AND CARE
– Before cleaning unplug the unit and let it cool down
completely.
– Do not immerse the unit, power cord and power plug of
the unit into water or any other liquids.
– Do not use detergents, abrasives or any solvents to
clean the unit.
– Clean the unit body with a soft, slightly damp cloth and
then wipe it dry.
STORAGE
– Let the unit cool down completely and clean it before
taking away for storage.
IM VT-8292_70x130.indd 6
03.10.2018 13:57:39
