Vitek VT-8282, Инструкция по эксплуатации

Страница: 5 / 44

5
ENGLISH
•
Do not put the operating unit on heat-sensitive or
soft surfaces (for instance, bed or sofa) and do not
cover the unit.
•
Be careful! The heating plates and the unit body in the
area of the heating plates stay hot for some time after
the unit is unplugged.
•
It is recommended to unwind the power cord to its full
length while using the unit.
•
The power cord may not:
– touch hot objects,
– run over sharp edges,
– be used as a handle for carrying the unit.
• Check the integrity of the power cord periodically.
•
Do not use the unit if the power cord or plug is damaged,
if the unit works improperly or after it was dropped.
•
Do not attempt to repair the unit. Do not disassemble
the unit by yourself, if any malfunction is detected or
after it was dropped, unplug the unit and apply to any
authorized service center at the contact addresses
given in the warranty certificate and on the website
www.vitek.ru.
•
To avoid damages, transport the unit in the original
package only.
• Keep the unit in a dry cool place out of reach of chil-
dren and disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USE ONLY,
ITS COMMERCIAL USAGE AND USAGE IN PRODUCTION
AREAS AND WORK SPACES IS PROHIBITED.
BEFORE THE FIRST USE
After unit transportation or storage at low tempera-
ture keep it for at least three hours at room tempera-
ture before switching on.
•
Unpack the unit completely and remove any pack-
aging materials that can prevent the unit operation.
• Unwind the power cord to its full length.
•
Check the unit for damages, do not use it in case of
damages.
•
Before plugging the unit in make sure that the oper-
ating voltage of the unit corresponds to the voltage
of your mains.
IM VT-8282_70x130.indd 5 03.08.2018 10:24:25