Vitek VT-8254, Инструкция по эксплуатации, Страница: 4 / 36

4
ENGLISH
•
Do not use the manicure set if the unit body or the
attachments are damaged or there are other damages.
•
Do not attempt to repair the unit. Do not disassemble the
unit by yourself, if any malfunction is detected or after it
was dropped, unplug the unit and apply to any autho-
rized service center at the contact addresses given in
the warranty certificate and on the website www.vitek.ru.
•
Transport the unit in the original package.
•
Keep the unit in a dry cool place out of reach of children
and disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USE ONLY,
ITS COMMERCIAL USAGE AND USAGE IN PRODUCTION
AREAS AND WORK SPACES IS PROHIBITED.
BEFORE THE FIRST USE
After unit transportation or storage at low temperature
keep it for at least three hours at room temperature
before switching on.
– Unpack the unit completely and remove any advertising
stickers that can prevent the unit operation.
– Check the unit for damages; do not use it in case of
damages.
– Wipe the motor unit (2) with a slightly damp soft cloth
and then wipe dry.
– Rub the accessories and attachments (7, 10, 11, 12) with
rubbing alcohol to disinfect them.
Battery installation and replacement
– Make sure that the operation mode switch (3) is set to
the position “0”.
– Remove the battery compartment lid (6) and insert
2 “AA” batteries (not supplied with the unit), strictly fol-
lowing the polarity.
– Place the battery compartment lid (6) back to its place.
– Remove the nail polish dryer battery compartment lid
(14) and insert or replace 2 “AA” batteries (not supplied
with the unit), strictly following the polarity.
WARNING:
– use only the “AA” batteries.
– do not use old and new batteries at the same time or dif-
ferent types of batteries;
– when the manicure set operation is unstable, check the
batteries and replace them if necessary.
– do not recharge the batteries.
– strictyl follow the polarity when installing the batteries.
IM VT-8254_70x130.indd 4 8/14/18 16:39