Vitek VT-8236, Инструкция по эксплуатации

Страница: 7 / 36

7
ENGLISH
CLEANING AND CARE
The hot air styler is intended for household use only.
•
Set the switch (4) to the «0» position, disconnect the hot
air styler from the mains and let it cool down.
•
Remove the attachment; to do this, press on the lock (3)
and remove the attachment.
•
Wipe the unit body (5) with a damp cloth and then wipe
it dry.
•
Clean the air inlet grid (6) with a brush.
•
Do not immerse the unit into water or any other liquids.
•
Do not use abrasives and solvents to clean the unit
body.
STORAGE
•
Disconnect the unit from the mains and clean it.
•
Do not wind the power cord around the hot air styler,
as this can damage the cord or the unit body. Handle
the power cord with care, do not pull, twist or stretch it,
especially near the power plug or at the junction point.
•
For easy storing there is a hanging loop (7), you can
hang the hot air styler on this loop provided that no water
gets on the unit in this position.
•
Keep the unit in a dry cool place out of reach of children
and disabled persons.
DELIVERY SET
Hot air styler – 1 pc.
Thermal brush 30 mm in diameter – 1 pc.
Concentrator nozzle – 1 pc.
Manual – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V ~ 50/60 Hz
Rated input power: 800 W
ATTENTION! Do not use the unit near water in the bath-
rooms, showers, swimming pools etc.
IM VT-8236_70x130.indd 7 25.02.2019 14:07:47