Vitek VT-8228, Инструкция по эксплуатации

Страница: 6 / 36

6
ENGLISH
– Attach the nozzle (3) to the unit body. The nozzle (3)
allows directing a narrow air flow of high intensity at a
definite hair lock.
– Insert the power plug into the mains socket. Use the
switch (1) to set the necessary operation mode.
Overheating protection
Overheating protection switches the hairdryer off if the
outgoing air flow is too hot. If the hairdryer switches off
during operation, set the operation mode switch (1) to
the “
0 ” position, unplug the hair dryer and make sure
that the inlets and outlets are unblocked. Let the hairdryer
cool down for 5-10 minutes and switch it on again. Do not
block the air inlets during unit operation and avoid getting
of hair into its air inlet.
CLEANING AND CARE
– The hair dryer is intended for household use only.
–
Set the switch (1) to the position « 0 » and disconnect
the hair dryer from the mains.
– You may wipe the unit body (2) with a damp cloth and
then wipe it dry.
–
Clean the air inlet grid (4) with a brush.
– Never immerse the unit into water or other liquids.
– Do not use abrasives and solvents to clean the unit
body.
STORAGE
– Unplug the hair dryer if you are not using it.
– Let the hair dryer cool down after its usage, keep the
unit away from children in a dry cool place.
– Never wind the power cord around the hairdryer, as
this can damage the cord. Handle the power cord with
care, do not pull, twist or stretch it, especially near
the power plug or at the junction point. Straighten the
cord periodically if it gets twisted.
– For easy storing there is a hanging loop (6), you can
hang the unit on this loop provided that no water gets
on the unit in this position; you can fold the handle (5)
to minimize the hairdryer size.
IM VT-8228_70x130.indd 6 29.08.2018 11:59:35