Vitek VT-6610 SR, Инструкция по эксплуатации, Страница: 7 / 48

7
ENGLISH
5. To confirm the setting press the button (5) «SET» or
after 5 seconds the digital symbols (13) will stop flash-
ing and the current time will be set.
Alarm signal actuation time setting
This model of clock radio allows using two alarms «AL1
and AL2».
Before setting the alarm actuation time make sure that the
current time is set correctly.
1.
In current time mode press and hold one of the but-
tons (6 or 7) «AL1 or AL2», the flashing digital symbols
(13) will appear on the display.
2. Press the “hours” setting button (2) «HOUR» to set
time in “hours”.
3.
Press the “minutes” setting button (9) «MIN» to set
time in “minutes”.
4.
In 5 seconds after setting the alarm actuation time the
display will show current time.
5. Press the buttons (6 or 7) «AL1 or AL2» repeatedly to
switch the alarm on and select the sound mode type:
– switching on the alarm sound, the light indicators
(11 and 15);
–
switching on the alarm sound mode «RADIO», the light
indicators (12 and 14).
Note:
–
if you select the alarm signal «Radio», first tune the radio
to the desired radio station and set the volume level.
6. To check the alarm actuation time press and hold
one of the buttons (6 or 7) «AL1 or AL2», the flash-
ing digital alarm actuation time symbols will appear
on the display, and after 5 seconds the display will
show current time.
7. To switch the alarm signal off press the button (6 or 7)
«AL1 or AL2» repeatedly until the light indicators (11,
12 or 14, 15) go out.
Snooze function
During the alarm (radio) signal you can press the button
(3) «SNOOZE» to switch the alarm off for 9 minutes; the
alarm signal will be repeating in 9 minutes.
VT-6610_IM_70x130.indd 7 04.07.2017 10:37:42