Vitek VT-6608 BK, Инструкция по эксплуатации

Страница: 8 / 48

8
ENGLISH
•
To switch the alarm (alarms) on in the current time
mode consequently press the button (4) « AL2/VOL– »
or (5) « AL1/VOL+ », until the corresponding alarm sig-
nal lights up.
Snooze
You can switch the alarm signal off for 9 minutes by pressing the
button
(7) «SNOOZE/SLEEP» , in 9 minutes the alarm signal
will be repeated. You can repeat this procedure during 1 hour.
Alarm switch off
•
To switch the alarm sound signal off press the button (8)
«
SOURCE/AL. OFF».
Display brightness setup
•
In the current time mode repeatedly press the button
(3) «DIMMER» to set up the necessary display (13)
brightness.
Radio stations reception
•
Connect the unit to the mains and consequently press
the button (8) «
SOURCE/AL. OFF» to select the neces-
sary frequency range: FM or AM.
•
Use the buttons (1) «TUN.DN / MIN» or (2) «TUN.UP /
HOUR» for tuning in the desired radio station frequency.
•
Manual tuning: consequently press the buttons (1)
«TUN.DN / MIN» or (2) «TUN.UP / HOUR» , for tuning in
the desired radio station frequency.
•
Auto tuning: press and hold the button (1) «TUN.DN /
MIN» or (2) «TUN.UP / HOUR» , for one second. The
tuner begins scanning and automatically holds after
receiving a strong radio station signal.
• To switch the radio off press and hold the button (8)
«
SOURCE/AL. OFF», the symbol « OFF » will appear on
the display, and after that the unit will be switched to the
current time mode.
•
For the best radio stations reception in the FM-range it
is recommended to unwind the FM-antenna (15) cable
and place it optimally.
•
Radio stations reception in the AM range is performed
by the inner magnetic antenna. Change the clock radio
position for the best reception.
Note: Since different factors, such as clock radio
position in the room, number of floors etc, effect the
VT-6608_IM_70x130.indd 8 01.07.2015 9:41:36