ENGLISH
5
walkie-talkies, games, computers and other
sources of interference may lead to tempo-
rary or permanent disturbances in receiving
signals by the main unit (1) , this does not
affect the main technical characteristics of
the unit, in some cases, the main unit (1) or
the external sensor (17) should be moved to
another location, free from the above said or
other obstacles preventing the passage of
signals from the sensor (17).
– When the external sensor (17) sends the
data, the indicator (20) lights up.
Main unit (1)
Note:
- the buttons (3, 4, 5, 8, 9, 11) are sen-
sory, you just need to touch them.
– Unfold the base (14), open the battery
compartment lid (13) and install 3 “AAA”
batteries (not supplied), strictly following
the polarity, you will hear a sound signal,
then install the battery compartment lid
(13) back to its place.
Note:
– after the batteries are installed, the main
unit (1) is mated to the external sensor
(17), and the reception indicator symbol
(10) will be flashing, after the main unit (1)
is mated to the external sensor (17), the
outside temperature (10) will be shown
on the display.
– the time of mating the main unit (1) with
the external sensor (17) depends on the
data transferring conditions from the sen-
sor (17) and the conditions of data recep-
tion by the main unit (1) and it does not
exceed 3 minutes.
– To change a data reception channel on
the main unit (1) consequently touch the
button (3) “ ”, the data reception chan-
nels “1, 2, 3”” (10) will change on the
display. Set the similar data reception
channel on the external sensor (17), to
do this open the battery compartment
lid (19), remove the batteries and set the
data reception channel corresponding to
the data reception channel on the main
unit (1) with the tuner (21).
– To search for and mate the external sen-
sor (17) to the main unit (1) press and hold
the button (3) “ ” for 3 seconds, the data
reception symbol (10) will light up and
flash on the display, after the main unit (1)
is mated to the external sensor (17), the
outside temperature (10) will be shown
on the display.
Current time and date setting
– Touch and hold the button (5) “ ” for
3 seconds, the time format digital sym-
bols (2) “24H or 12H” will be flashing on
the display, touch the buttons (4 or 9) “
” “ ” to select the necessary time for-
mat “24H or 12H”, touch the button (5)
“ ” to confirm, the current time digital
symbols “hours” (2) will be flashing on
the display.
– Touch or touch and hold the buttons (4
or 9) “ ”, “ ” to set the current time in
“hours”, touch the button (5) “ ” to con-
firm, the digital symbols “minutes” (2) will
be flashing on the display.
– Touch or touch and hold the buttons (4 or 9)
“ ”, “ ” to set the current time in “min-
utes”, touch the button (5) “ ” to confirm,
the digital symbols “year” (2) will be flash-
ing on the display.
– Touch or touch and hold the buttons (4 or 9)
“ ”, “ ” to set the current time in “min-
utes”, touch the button (5) “ ” to confirm,
the digital symbols “year” (2) will be flash-
ing on the display.
– Touch or touch and hold the buttons (4 or 9)
“ ”, “ ” to set the current “year”, touch
the button (5) “ ” to confirm, the digital
symbols “month” (12) will be flashing on
the display.
– Touch or touch and hold the buttons (4 or 9)
“ ”, “ ” to set the current “month”, touch
the button (5) “ ” to confirm, the digi-
tal symbols “day” (12) will be flashing on
the display.
– Touch or touch and hold the buttons (4 or 9)
“ ”, “ ” to set the current “day”, touch
the button (5) “ ” to confirm, the digital
IM VT-6412.indd 5
27.02.2018 16:44:43
