Vitek VT-6410, Инструкция по эксплуатации

Страница: 3 / 52

ENGLISH
3
WIRELESS WEATHER STATION VT-6410
The main unit of the wireless weather station
shows current time, ambient temperature,
relative humidity and the weather forecast.
You can use the external wired sensor to con-
trol the temperature outside.
DESCRIPTION
1. Display
2. Calendar
3. Current time/alarm actuation/alarm
on “ ”/snooze « » digital symbols
4. Outside relative humidity digital symbols
4а. External sensor data reception/
data reception channel symbol
«СН1, СН2, СН3»
5. Digital symbols of the outside
temperature
6. Weather forecast symbols
7. Illumination/snooze button
«SNOOZE/LIGHT»
8. Digital symbols of the ambient
temperature
9. Outside relative humidity digital symbols
10. Main unit
11. Base
12. Battery compartment lid
13, 20. Hanging spots
14. Current time/date setting button “SET”
15, 16. Current time/date/alarm actuation
setting buttons «UP, DOWN»
Additional functions
of the buttons (15, 16):
– (15) “UP”, viewing of maximal and
minimal temperature values and relative
humidity/resetting the maximal and
minimal temperature values and relative
humidity;
– (16) “DOWN”, switching the temperature
measurement units «°С/°F»
17. Maximal and minimal temperature value
and relative humidity view/resetting
button “MEM”
18. Channel switching button “CH”
19. Alarm setting button “ALARM”
21. External sensor
22. Display
23. Wired external sensor
24. Battery compartment
25. Hanging spot
26. Test data transmission button “TEST”
27. Tuner “CH 1 2 3”
28. Temperature measurement unit
selection button «°C/°F»
29. Battery compartment lid
30. Base
SAFETY MEASURES
Before using the weather station, read this
instruction manual carefully and keep it
for future reference. Use the unit for its
intended purpose only, as specified in this
manual.
Mishandling the unit can lead to its breakage
and cause harm to the user or damage to
his/her property.
•
The wireless weather station cannot be
used for medical purposes, for public
information or as a measuring instru-
ment.
•
Do not install the external sensor in
places with the temperature below 0°С, it
may lead to shorter service life of the bat-
teries, shorter data transmission range
and display indication problems.
•
Install the external sensor in the room and
place the wired sensor outside.
•
Do not use the unit in places with high
temperature and relative humidity more
than 80%.
ATTENTION! Keep the unit dry. Do not
immerse the unit into water or any other
liquids.
•
Do not expose the unit to strong electro-
magnetic fields, strong vibration, avoid
dropping the unit – this may lead to mal-
function of the unit or its failure.
•
Use only batteries of the type stated in
the instruction manual.
•
Do not use a new and an old battery at
the same time.
•
If you are not going to use the unit for a
long time, it is recommended to remove
IM VT-6410.indd 3 20.02.2018 10:03:50