Vitek VT-5004, Инструкция по эксплуатации

Страница: 9 / 24

allow you to copy currently channel number to the channel number
which you need. Press [CH+] or [CH-] to choose target channel
number (it means the Channel has been chosen, when the channel
number s color change to red.), Press [V+] or [V-] to add or reduce
the number, then press [CH+] or [CH-] to choose currently channel
number, press [V+] or [V-] to realize the function.
WEAK SIGNAL: Usually, the weak signal has been set to ON, even the weak
signal can be Received in good condition. The weak signal would
be set to OFF when using AV Output function, if not, the AV output
would be without color.
Pre-set function:
Press the [MENU] button for five times continuously, you would find the pre-
set function menu. Press [CH+] or [CH-] to choose item which you request,
then press [V+] or [V-] to switchover the item. The format is as follows:
AUTO SEARCH: the original set is auto search, press [V+] or [V-] to make it
auto search. It would Search all the currently TV channels and store
them.
SEARCH: press [CH+] or [CH-] to choose this item, then press [V+] or [V-] to
proceed to search channels by hand. It would search one channel
and store it.
FINE TUNE: press [CH+] or [CH-] to choose this item, then press [V+]
or [V-], you can adjust the program conditions while you are
watching by hand.
BAND: press [CH+] or [CH-] to choose this item, then press [V+] or [V-] to
choose the band, the band formats which you can choose have:
VHF-L, VHL-H, UHF.
ENGLISH
8
Vt-5004.qxd 18.11.2004 10:00 Page 8