Vitek VT-4073 SR, Инструкция по эксплуатации

Страница: 5 / 92

ENGLISH
5
Channal amplifier
Digital audio amplifier
2.4. PLAY MODE SETTING
If you find that the picture couldn’t spread all over the screen or there is no colour, please, select PAL, NTSC or Multi mode by pressing the N/P key.
DVD disc may support pictures with different proportions. When using the TV mode you can also match the screen proportion to the proportions
of your discs. Select Normal/Full, Normal/mailbox, wide screen under the System setup. Operate in the following way: Press <SETUP> key to get
General setup, press <PLAY> key, use direction keys up and down to select the TV mode, then press left/right keys to to select Normal/Full, Normal/
mailbox, or wide screen options according to your need. Finally, press <PLAY>.
3. BASIC OPERATION
Upon the completion of all the system connection works the device is ready for service. Before playing ensure the completion of all the following
preparatory operations:
1. Switch on the TV and select AV mode. If the connection format is Svideo, select the Svideo mode.
. If an amplifier is used, switch it on and select AC3 or DVD mode.
3. Plug the DVD player cable in the electricity network.
Step 1: Press POWER key. After pressing DISC LOADING will display on the screen:
If the disc tray is empty, the NO DISC notice will appear on the screen.
Step : Press the OPEN/CLOSE key, the disc tray will come out automatically.
Step 3: Put he disc on the tray, press the OPEN/CLOSE key to close the tray, the disc type will be shown in the upperleft corner of the screen, as well
as on the VFD screen.
Note: Press the STANDBY key on the remote controller – the unit will switch to standby status. The power consumption in the standby mode is
approx. 10W.
4073IM.indd 5 09.10.2007 12:28:31